Post by sumiseo558899 on Nov 5, 2024 14:37:16 GMT 5.5
The US presidential campaign is just gaining momentum, and Facebook is already showing its strictness. Recently, more and more people are facing rejections, stricter rules, and mass blocks. We conducted several experiments and tested other people's methods in the first half of 2024. Now we are ready to offer recommendations to help reduce the number of rejections and avoid policy violations.
Preparatory stages and time lag
In modern traffic arbitrage, no preparation stage can be missed. From warming up accounts to setting up fan pages, every detail requires attention. Experience shows that careful warming up can cut not only the number of rejections in half, but also minimize possible risks and checks.
One of the methods for warming up advertising accounts and fan pages is to use boosts for posts. Depending on the level of trust in the account, you can immediately publish creatives that are planned to be used in campaigns, or start with safe, neutral content. The degree of warming up should correspond to the level of trust in the account, fan page and the presence of possible problems - the minimum budget for warming up should cover one billing cycle.
Alternative approach:
We fill the fan page with content similar in theme to the planned campaigns;
Setting up cloaking on the target link;
We launch the safest creatives possible, adhering to the 1:1:1 scheme.
In the first option, the fan page and creatives are warmed up, in the second - the fan page and target link. In both cases, it is necessary to unwind the budget before the first payment and make it on time.
Hard warm-up. For those who are confident in their abilities, there is a more radical method. It starts the same way as other schemes, but after the first payment, a more risky creative is launched.
As a result, some accounts may be blocked, but the remaining ones will work without deviations and violations for a long time. For this method, it is important to have a sufficient number of accounts with a high level of trust, which can be purchased from us.
As for the time delay, everything is extremely simple:
We linked the autoreg to the parent account or created an account in BM - we give time for adaptation, half a day or a day;
We linked a payment method – wait an hour or two;
We created a campaign – we leave it in drafts for 30 minutes, and then send it for moderation.
Although warming up and holding for a while do not provide a 100% guarantee of flawless operation, they significantly reduce the risks of violations and deviations, and also increase the chances of successfully passing moderation.
Lead Panda your reliable partner
Strategies for launching creatives, using fan pages and managing domains
We start by launching creatives on content writing service
fan pages with PZRD, actively scrolling them until the first rejections begin to appear. As soon as one or two rejections appear, we move on to launching new creatives on other fan pages. We repeat the process until all pages are involved. After a break, old fan pages can be used for launching again, as they can show good results again.
For creatives, we recommend launching each ad in several advertising campaigns at the same time, for example, in two or three. This increases the likelihood of success and allows you to evaluate the creative's resistance to blocking. The 1:2:2 or 1:3:3 schemes work well.
If the creative was rejected in all ad sets, it is better to delete it immediately and temporarily suspend the use of related fan pages. If the creative successfully passed moderation in all ad sets, this is a signal of its high stability - you can use it in other ad groups or create duplicates. In the case when the creative was rejected in one ad set, but successfully passed in another, you can consider filing an appeal or use other methods of recovery.
Important: never duplicate ad sets immediately after launch or with small expenses, this may raise suspicions from Facebook. It is better to unscrew at least 2-3 billings before duplicating.
Regarding domains:
Choose the most trusted domains (recommendations can be found in our article );
Use no more than one domain per advertising account;
If deviations continue, changing the domain may help;
Don't throw away used domains - they can be successfully launched again in a month or two.
Thus, creatives, fan pages and domains should be in constant rotation. Something that has not passed moderation today may be successfully launched in some time. In addition, creatives can be revived not only through appeals.
Promoting rejected creative
Even if your ad is rejected, there are a few ways to re-run it. The first and most obvious is to appeal. We recommend appealing, especially if your creative is not too aggressive. Half the time, it works and the ad is released from rejection, allowing you to continue running.
How to Reduce Denials and Avoid Policy Violations
However, filing an appeal is not necessary, especially if you doubt success. A rejected ad can be relaunched without an appeal in two other ways.
Method 1: Go to the ad as a post and promote it via post boost. Choose the “Reach” or “Reactions” objective, because in this case moderation may be more lenient. First, open the ad itself and go to the original post.
Preparatory stages and time lag
In modern traffic arbitrage, no preparation stage can be missed. From warming up accounts to setting up fan pages, every detail requires attention. Experience shows that careful warming up can cut not only the number of rejections in half, but also minimize possible risks and checks.
One of the methods for warming up advertising accounts and fan pages is to use boosts for posts. Depending on the level of trust in the account, you can immediately publish creatives that are planned to be used in campaigns, or start with safe, neutral content. The degree of warming up should correspond to the level of trust in the account, fan page and the presence of possible problems - the minimum budget for warming up should cover one billing cycle.
Alternative approach:
We fill the fan page with content similar in theme to the planned campaigns;
Setting up cloaking on the target link;
We launch the safest creatives possible, adhering to the 1:1:1 scheme.
In the first option, the fan page and creatives are warmed up, in the second - the fan page and target link. In both cases, it is necessary to unwind the budget before the first payment and make it on time.
Hard warm-up. For those who are confident in their abilities, there is a more radical method. It starts the same way as other schemes, but after the first payment, a more risky creative is launched.
As a result, some accounts may be blocked, but the remaining ones will work without deviations and violations for a long time. For this method, it is important to have a sufficient number of accounts with a high level of trust, which can be purchased from us.
As for the time delay, everything is extremely simple:
We linked the autoreg to the parent account or created an account in BM - we give time for adaptation, half a day or a day;
We linked a payment method – wait an hour or two;
We created a campaign – we leave it in drafts for 30 minutes, and then send it for moderation.
Although warming up and holding for a while do not provide a 100% guarantee of flawless operation, they significantly reduce the risks of violations and deviations, and also increase the chances of successfully passing moderation.
Lead Panda your reliable partner
Strategies for launching creatives, using fan pages and managing domains
We start by launching creatives on content writing service
fan pages with PZRD, actively scrolling them until the first rejections begin to appear. As soon as one or two rejections appear, we move on to launching new creatives on other fan pages. We repeat the process until all pages are involved. After a break, old fan pages can be used for launching again, as they can show good results again.
For creatives, we recommend launching each ad in several advertising campaigns at the same time, for example, in two or three. This increases the likelihood of success and allows you to evaluate the creative's resistance to blocking. The 1:2:2 or 1:3:3 schemes work well.
If the creative was rejected in all ad sets, it is better to delete it immediately and temporarily suspend the use of related fan pages. If the creative successfully passed moderation in all ad sets, this is a signal of its high stability - you can use it in other ad groups or create duplicates. In the case when the creative was rejected in one ad set, but successfully passed in another, you can consider filing an appeal or use other methods of recovery.
Important: never duplicate ad sets immediately after launch or with small expenses, this may raise suspicions from Facebook. It is better to unscrew at least 2-3 billings before duplicating.
Regarding domains:
Choose the most trusted domains (recommendations can be found in our article );
Use no more than one domain per advertising account;
If deviations continue, changing the domain may help;
Don't throw away used domains - they can be successfully launched again in a month or two.
Thus, creatives, fan pages and domains should be in constant rotation. Something that has not passed moderation today may be successfully launched in some time. In addition, creatives can be revived not only through appeals.
Promoting rejected creative
Even if your ad is rejected, there are a few ways to re-run it. The first and most obvious is to appeal. We recommend appealing, especially if your creative is not too aggressive. Half the time, it works and the ad is released from rejection, allowing you to continue running.
How to Reduce Denials and Avoid Policy Violations
However, filing an appeal is not necessary, especially if you doubt success. A rejected ad can be relaunched without an appeal in two other ways.
Method 1: Go to the ad as a post and promote it via post boost. Choose the “Reach” or “Reactions” objective, because in this case moderation may be more lenient. First, open the ad itself and go to the original post.